Belt Covers

Fit perfect on GTR carbon with 120mm Cloudweels

I have had my board for I think close to six years I bought a two and one carbon fiber, originally I started out with a smaller wheel, I’m on my third progressive wheel, including your the 107mm, over time went thru 4 sets of these tires, currently I am on the 7 inch, and if I was to be honest it has been some of the most exilerating experiences ever, it’s changed my life for the better, and I couldn’t be happier with skateboarding at this point thanks for the opportunity. (after all that are you guys going to build me a new bat so I can keep my same board.) fyi, I don’t want to move on 🫠

As above.

High quality, went straight on no worries

exactly what i needed

Thank you they are awesome

Perfect fit!

The belt covers fditted well and were of great quality

Very good quality fit well won’t fit with the 200 mm tyres

Does what they are designed to do

Awesome, does the job and looks good too.

They are what they are. Fit perfectly and come with fitting hardware.
Happy with them.

Do the job well

Super simple cheap peace of mind. They fit perfectly and install could not be any easier.

The fact you spend $270 on 107mm wheels and they don't chuck in a pair of these covers is outrageous. Definitely milking it imo

Much better than the stock ones for my CarbonGT, also protects the outside edge of the motor mount plates.

To most people these are simply a belt cover but look closely to me it sums up Evolves commitment to detail and they fit !
Isn’t that one of the many reasons we chose Evolve… Quality

all good and a pleasure to deal with. i have dealt with the shop several times and nothing is ever a problem.
i have recommended to lots of people and given contact details which i know has lead to them making a purchase

Decided it was time to upgrade my wheels from the stock 83mm that came with the board back when I bought. Glad I did so, but needed new wheel covers since the old ones were too small. These work just fine. Thank goodness Evolve kept everything backwards compatible.

The belt covers are just as described and it gives the board a clean look !!

I love the Belt Covers, they fitted very well on my board with 110mm wheels.

These guys never disappoint

They fit and work great as advertised
Only slight issue some may have is they come with screws that are too small for the allen key supplied with my gtr bamboo. They're tiny

I had to find a allen key to fit them. 2.5mm if anyone else had this issue

These covers are made for my Abec11 107's. Perfect fit and do the job nicely.

Love everything

It's great that there is a proper size to fit and cover the belts with the ABEC 11 107's, however, the covers are not as pictured and there is no example photo of what you will receive if you choose to purchase them. I had to also request they check the screws, they were about 1 or 2mm too long and would not fasten in the cover properly. A new set of screws were quickly sent out which rectified the problem. Would I recommend these covers, well there is no other choice really, or is there?

Perfect fit. Great option for big tires.

Belt covets Cover the belts. Have lost a grub screw or two. Don't keep the belts on. Or protect the motors. Be a great idea 💡 if they did. 👍 incorporate belt covers into a bumper etc to protect the drive motors.

Works great

Great product but if they protected the motor mounts as well that would be great for me.

Got some 107’s and figured I’d order these. They work just fine.

Works perfectly!